VMAC MULTIFUNCTION - COMPRESSOR-GENERATOR POWER SYSTEM

Overview

For customers who need an air compressor and an AC generator. This self-contained system can be fully integrated into any diesel work truck fuel system or skid-mounted for stand-alone applications with an optional external fuel tank.

Components included:

Applications – Common jobs that use the Compressor-Generator Power System:

Components

AIR COMPRESSOR

Oil-injected rotary screw; belt-driven; 45 CFM @ 100 psi, 100% duty cycle; Up to 175 psi

AC GENERATOR

AC: 10.2kW continuous output; 1 x 30A, 240V, 60Hz 3 phase circuit with terminal strip; 2 x 20A, 120V, 60Hz single phase circuit with terminal strip

AIR/OIL SEPARATOR TANK

Separates compressor oil from compressed air.

KUBOTA DIESEL D902 ENGINE

3-cylinder, naturally aspirated 3,600 RPM, Tier 4 Final.

BATTERY

Included AC Delco 12V, 460 CCA, 575 CA

Specifications

Air Compressor Output

45 CFM @ 100 psi (175 psi max)

Air Compressor Type

Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw

Engine

Kubota Diesel D902 3-cylinder, naturally aspirated 3,600 RPM, Tier 4 Final

AC Generator

  • 10.2 kW continuous output
  • 1 x 30 A, 240 V, 60 Hz single phase circuit with terminal strip
  • 2 x 20 A, 120 V, 60 Hz single phase circuit with terminal strip

Throttle Control

2-speed throttle, responds to air demand

Battery

AC Delco 12 V, 460 CCA, 575 CA

Control System

  • Customizable digital controls
  • Remote mounted generator/welder and compressor control panels
  • Any one function or all three can be selected at any time
  • Engine auto-restarts with air demand
  • Separate selector switches engage compressor and generator
  • With compressor only selected, and sustained periods of no air use, the control system will shut down the engine
  • With any other function selected, the engine will not shut down automatically
  • Programmable auto restart for cold temperature or low battery voltage

Cold Climate Protection

  • Adjustable glow plug control.
  • Engine and compressor will wait till the temperatures are above 41°F (5°C) before loading and going into a running state.
  • Engine will automatically restart when system temperature falls below 23°F (-5°C); small heat strip included in LCD Digital Control Box.
  • Battery jump start connections are recommended to be tied into the truck batteries in locations where extreme cold is expected. It is not necessary in mild climates.

Weight (wet)

Approximately 550 lbs (249 kg)

Dimensions

  • 33” (l) x 23” (w) x 29” (h); 83.8 cm (l) x 58.4 cm (w) x 73.7 cm (h)
  • Mounting Plate: 20” (l) x 20” (w); 50.8 cm (l) x 50.8 cm (w)

Decibels (dB) @ 21 feet (6.4 meters)

81.2 dB at high idle, 76 dB at low idle, 0 dB in Standby Mode

Fuel Supply Options

  • 7-Gallon tank with fuel gauge and low fuel shut-off sensor
  • External Diesel Fuel Pump Kit

Air Receiver Tank (recommended, not included)

Minimum 10-Gallon Air Receiver Tank – Recommended for proper operation of all functions.

Warranty

  • Two years on all major components; VMAC air ends are covered by VMAC’s Lifetime Warranty; the Kubota engine is covered by Kubota’s 2-Year warranty.
  • For more information about VMAC’s or Kubota’s warranty policies, visit www.vmacair.com/warranty

REQUEST A QUOTE

OUR QUOTING PROCESS ALLOWS FOR HASSLE-FREE QUOTE SUBMISSION IN JUST A FEW MINUTES OR LESS!

CONTACT US NOW

WE ARE AVAILABLE DURING SCHEDULED OPERATING HOURS TO ANSWER ALL INBOUND INQUIRIES

Available units

Stock units