TK Truck Body located in Edmonton, Alberta, is a truck/van body manufacturer and fleet repair shop.
16445 130 Ave NW, Edmonton, AB T5V 1K5
Phone: 780 447 9529
Fax: 780 447 2468
We are available during scheduled operating hours to answer all inbound inquiries.
We are available during scheduled operating hours to answer all inbound inquiries.
The UNDERHOOD™ 40 rotary screw air compressor system is the only solution for commercial vans and operators who use small air tools for light duty applications, and is the only air compressor that solves common safety issues found with traditional air compressors in vans.
Van Mounting Kits
VMAC engineers van mounting kits for the easiest possible installation. Working closely with leading van manufacturers, VMAC ensures that mounting kits do not affect OEM warranties.
Mounting Kits available for:
Some applications are restricted to specific series and/or models. Please confirm compatible vehicles on VMAC’s Application list.
Applications – Common jobs that use the UNDERHOOD™ 40 air compressor are:
Commonly used air tools – UNDERHOOD™ 40 air compressors can be used for:
Mounting Kits available for:
UNDERHOOD™ 40 air compressors free up to 10 cubic feet in the cargo area because the air compressor mounts in the engine compartment. The only space required in the cargo area is 1.7 cubic feet for a combined air/oil cooler and air/oil separator tank.
Reduce vehicle GVW by up to 290 lb
UNDERHOOD™ 40 air compressors reduce van GVW by as much as 290 lb. Choosing a lightweight air compressor means you’ll be able to add more tools and equipment to your van, carry more materials, or take advantage of better fuel economy.
Up to 40 CFM. 100% of the time
UNDERHOOD™ 40 air compressors use patented rotary screw technology designed to run at 100% duty cycle without stopping, so operators don’t have to wait for their air compressor to fill up a large air receiver tank.
Eliminate common safety issues
UNDERHOOD™ 40 – Van Series air compressor are the only 40 CFM air compressors specifically engineered to eliminate safety hazards that van operators face including lifting injuries, toxic fume exposure and gas fires inside the cargo area.
COMPRESSOR
The UNDERHOOD™ 40 compressor mounts under the hood of your van. To operate, simply shift your van into park and engage the parking brake. With the engine idling, a simple on/off switch turns on the compressor system. Once on, an electric clutch engages on the compressor, the engine idles up, and the rotary screw compressor delivers a steady, continuous flow of air to your tools.
WHASP TANK
The WHASP Tank is an integrated cooler/tank that mounts in the cargo area on your van. An air/oil mixture is thrust from the compressor to the WHASP Tank that both cools the air/oil mixture, and separates and then recirculates the oil back to the compressor. The compressed air flows continuously to our auxiliary air receiver tank and onto your air tools.
INTERFACE PANEL
Easy to read hour meter; On/off controls with indicator light
Air Compressor Output
Up to 40 CFM @ 100 psi (150 psi max)
Air Compressor Type
Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw
Total System Weight (wet)
Approximately 85 lb (38.5 kg)
WHASP Tank
Throttle Control
Two-speed operation; digital throttle control connects to OBD2 CAN bus connector**, automatically modulates engine RPM depending on air usage; high idle adjustment
Interface Panel
Safety System
Air Receiver Tank
(recommended, not included)
Minimum 6-Gallon Air Receiver Tank – Recommended for best performance.
Warranty
Two years on all major components; VMAC air-ends are covered by VMAC’s Lifetime Limited Warranty; for details, visit www.vmacair.com/warranty
*Actual maximum CFM output of the air compressor varies by vehicle application. See Application List for details.
**2019+ model year vans only
OUR QUOTING PROCESS ALLOWS FOR HASSLE-FREE QUOTE SUBMISSION IN JUST A FEW MINUTES OR LESS!
WE ARE AVAILABLE MONDAY TO FRIDAY FROM 7:30AM - 4:00PM TO ANSWER ALL INBOUND INQUIRIES
TK Truck Body located in Edmonton, Alberta, is a truck/van body manufacturer and fleet repair shop.
16445 130 Ave NW, Edmonton, AB T5V 1K5
Phone: 780 447 9529
Fax: 780 447 2468
SALES: John office line 780 447 9535
PARTS: Mike E office line 780 447 9532
SERVICE: Tyler Trosko office line 587 416 2552