Compressor, Generator & Welder Power System in Edmonton, AB

VMAC MULTIFUNCTION - AIR COMPRESSOR-GENERATOR-WELDER POWER SYSTEM

Overview

Extreme performance in a single compact system. This system includes all the power you need on the jobsite to complete your work. This self-contained system is ideal for mechanic’s trucks with electric or electric over hydraulic cranes. The Compressor-Generator-Welder system can operate electrical equipment, air tools and welding accessories.

Components included:

45 CFM Rotary Screw Air Compressor
8 kW Continuous AC Generator
250 A DC Welder (adjustable)
12-48 V Battery Booster (adjustable)
12-48 V Battery Charger (adjustable)
Factory-installed Cold Climate Kit – 120 V, tested to -40°F (-40°C)

Applications – Common jobs that use the Compressor-Generator-Welder Power System:

Components

AIR COMPRESSOR

High airflow, 100% duty cycle with the reliability of the global leader in mobile compressed air.

WELDER

Multi-process welding including gouging, constant current, constant voltage and the ability to run a suit-case style wire feeder.

BATTERY CHARGER

Keep your customers up and running with a mobile battery charger.

BATTERY BOOSTER

Boost anything from a car to a haul truck.

GENERATOR

Proven mobile power solution to run your electronic equipment and electric tools.

COLD CLIMATE PROTECTION FOR -40º

Cold Climate Protection recommended if ambient temperatures frequently drop below -10C (14F). Combine with optional 1000W inverter and warm the system on the way to the job site.

Specifications

Air Compressor Output

Up to 70 CFM* @ 100 psi (175 psi max)

Air Compressor Type

Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw

Engine

Kubota Diesel D902 3-cylinder, naturally aspirated 3,600 RPM, Tier 4 Final

Throttle Control

2-speed throttle, responds to air demand

AC/DC Generator/Welder

AC:
8 kW continuous output
1 x 30A, 240V, 60Hz 3 phase circuit (w/wo receptacles)
2 x 20A, 120V, 60Hz single phase circuit (w/wo receptacles) DC: For battery boosting/charging; other

DC loads
Boost – 300A max @ 13V; Charge – 12V,24V,36V,48V
CC mode for SMAW and GTAW (stick/TIG welding)
250A @ 35% duty cycle; 190A @ 60% duty cycle

Battery

AC Delco 12 V, 460 CCA, 575 CA

Control System

Customizable digital controls
Remote mounted generator/welder and compressor control panels
Any one function or all three can be selected at any time
Engine auto-restarts with air demand
Separate selector switches engage compressor and generator
With compressor only selected, and sustained periods of no air use, the control system will shut down the engine
With any other function selected, the engine will not shut down automatically
Programmable auto restart for cold temperature or low battery voltage

Cold Climate Protection

Adjustable glow plug control.
Engine and compressor will wait till the temperatures are above 41°F (5°C) before loading and going into a running state.
Engine will automatically restart when system temperature falls below 23°F (-5°C); small heat strip included in LCD Digital Control Box.
Battery jump start connections are recommended to be tied into the truck batteries in locations where extreme cold is expected. It is not necessary in mild climates.

Throttle Control

Variable speed; digital throttle control connects to OBD2 CAN bus connector**; adjusts truck engine speed automatically to match air demand

Weight (wet)

Approximately 560 lbs (254 kg)

Dimensions

33” (l) x 23” (w) x 29” (h); 83.8 cm (l) x 58.4 cm (w) x 73.7 cm (h)
Mounting Plate: 20” (l) x 20” (w); 50.8 cm (l) x 50.8 cm (w)

Decibels (dB) @ 21 feet (6.4 meters)

81.2 dB at high idle, 76 dB at low idle, 0 dB in Standby Mode

Fuel Supply Options

7-Gallon tank with fuel gauge and low fuel shut-off sensor;;External Diesel Fuel Pump Kit

Air Receiver Tank (recommended, not included)

Minimum 10-Gallon Air Receiver Tank – Recommended for proper operation of all functions.

Warranty

Two years on all major components; VMAC air ends are covered by VMAC’s Lifetime Warranty; the Kubota engine is covered by Kubota’s 2-Year warranty.
For more information about VMAC’s or Kubota’s warranty policies, visit www.vmacair.com/warranty.

VMAC MULTIFUNCTION - AIR COMPRESSOR-GENERATOR-WELDER POWER SYSTEM

Overview

Components

Specifications

Contact Us

CALL US NOW

CONTACT US

TRUCK BODIES

SERVICE BODIES

FOLLOW US

We are still operating, click here for our COVID-19 updates and preparedness statement