TK Truck Body located in Edmonton, Alberta, is a truck/van body manufacturer and fleet repair shop.
16445 130 Ave NW, Edmonton, AB T5V 1K5
Phone: 780 447 9529
Fax: 780 447 2468
We are available during scheduled operating hours to answer all inbound inquiries.
We are available during scheduled operating hours to answer all inbound inquiries.
For customers who need an air compressor and an AC generator. This self-contained system can be fully integrated into any diesel work truck fuel system or skid-mounted for stand-alone applications with an optional external fuel tank.
Components included:
Applications – Common jobs that use the Compressor-Generator Power System:
AIR COMPRESSOR
Oil-injected rotary screw; belt-driven; 45 CFM @ 100 psi, 100% duty cycle; Up to 175 psi
AC GENERATOR
AC: 10.2kW continuous output; 1 x 30A, 240V, 60Hz 3 phase circuit with terminal strip; 2 x 20A, 120V, 60Hz single phase circuit with terminal strip
AIR/OIL SEPARATOR TANK
Separates compressor oil from compressed air.
KUBOTA DIESEL D902 ENGINE
3-cylinder, naturally aspirated 3,600 RPM, Tier 4 Final.
BATTERY
Included AC Delco 12V, 460 CCA, 575 CA
Air Compressor Output
45 CFM @ 100 psi (175 psi max)
Air Compressor Type
Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw
Engine
Kubota Diesel D902 3-cylinder, naturally aspirated 3,600 RPM, Tier 4 Final
AC Generator
Throttle Control
2-speed throttle, responds to air demand
Battery
AC Delco 12 V, 460 CCA, 575 CA
Control System
Cold Climate Protection
Weight (wet)
Approximately 550 lbs (249 kg)
Dimensions
Decibels (dB) @ 21 feet (6.4 meters)
81.2 dB at high idle, 76 dB at low idle, 0 dB in Standby Mode
Fuel Supply Options
Air Receiver Tank (recommended, not included)
Minimum 10-Gallon Air Receiver Tank – Recommended for proper operation of all functions.
Warranty
OUR QUOTING PROCESS ALLOWS FOR HASSLE-FREE QUOTE SUBMISSION IN JUST A FEW MINUTES OR LESS!
WE ARE AVAILABLE MONDAY TO FRIDAY FROM 7:30AM - 4:00PM TO ANSWER ALL INBOUND INQUIRIES
TK Truck Body located in Edmonton, Alberta, is a truck/van body manufacturer and fleet repair shop.
16445 130 Ave NW, Edmonton, AB T5V 1K5
Phone: 780 447 9529
Fax: 780 447 2468
SALES: John office line 780 447 9535
PARTS: Mike E office line 780 447 9532
SERVICE: Tyler Trosko office line 587 416 2552