TK Truck Body
16445 130 Ave NW,
Edmonton,
AB T5V 1K5
Phone: 780 447 9529
Fax: 780 447 2468
The 40 CFM VMAC Hydraulic air compressor is the best choice for customers who require hydraulic-powered compressed air and want better performance than what they are getting out of their current reciprocating air compressor.
The powerful rotary screw air compressor is ideal for operating small to medium sized air tools. The compact design allows it to fit on trucks and specialty equipment with limited available space.
Applications – Common jobs that use the compressor system:
Commonly used tools:
Free up to 6 cubic feet on your truck body
VMAC Hydraulic 40 CFM air compressors free up to 6 cubic feet on the truck deck. Systems are designed and engineered to be compact for service trucks and applications where space is limited.
Decrease truck GVW by up to 260 lbs
VMAC Hydraulic 40 CFM air compressors reduce truck GVW by as much as 260 lbs. This is because VMAC designs systems with lightweight materials and integrated components. Choosing a lightweight air compressor means you’ll be able to add more tools and equipment to your truck, carry more materials, or take advantage of better fuel economy.
Up to 40 CFM. 100% of the time.
VMAC Hydraulic 40 CFM air compressors use patented rotary screw technology that can operate intermittently for smaller jobs, but are designed to run at 100% duty cycle without stopping, so operators don’t have to wait for their air compressor to fill up an air receiver tank. This maximizes tool performance and eliminates downtime by keeping operators working.
Easy installation
VMAC DTM 70 CFM air compressors are easy to install, making installation times up to 50% faster than other under deck air compressor systems. No modifications are required to the RAM or Ford transfer case. No drive shafts are required to cause alignment issues. Traditional under deck air compressors for RAM and Ford Super Duty trucks are extremely heavy, have poor ground clearance, and require additional sourcing of components. VMAC mounting kits are application engineered for RAM and Ford diesel trucks and include all the necessary components.
Free up to 25 cubic feet
VMAC DTM 70 CFM air compressors free up to 25 cubic feet on the truck deck because the air compressor mounts to the transmission, and the rest of the system mounts under the truck. In fact, no components get installed on the truck deck which ensures a clean and professional looking truck, and space for other equipment, tools or materials.
Avoid frustrating breakdowns and maintenance issues
VMAC DTM 70 CFM air compressors are powered by a PTO mounted on the truck’s transmission. Because they don’t have their own engine that needs constant maintenance, less time and money is spent on fixing engine issues and more time is spent on jobs making money.
Work in any climate
VMAC DTM 70 CFM air compressors are proven to work in any extreme climate. With an integrated automatic heater, the compressor is ready to work when you are.
INTEGRATED HYDRAULIC/ COMPRESSOR OIL COOLER
12V/24V activated fan, turns on/off automatically to adapt to hydraulic and compressor oil temperature
Digital Control Module
Controls system operation and stored settings
VMAC Air Compressor
Oil-injected rotary screw; direct-driven;25-60 CFM @ 100 psi; 100% duty cycle;up to 150 psi
Digital Display Block
LCD for on/off controls, observing system status and adjusting parameters, mounts where needed on truck
Air Discharge
Controls flow of hydraulic oil through the system
Air Discharge
Includes check valve
Air/Oil Seperator Tank
Separates compressor oil from compressed air
Air Compressor Output
25-40 CFM* @ 100 psi (150 psi max)
Air Compressor Type
Direct-driven, 100% duty cycle, VMAC oil-injected rotary screw
Hydraulic Flow Required
9-12 GPM (34-46 LPM); open center hydraulic circuit
Hydraulic Pressure at Full Load (hydraulic pump is recommended)
2,345 psi (162 bar); 3,000 psi (207 bar)
Weight (dry)
Approximately 150 lbs (68 kg)
Dimensions
24.0” (l) x 16.5” (w) x 18.0” (h); 61.0 cm (l) x 41.9 cm (w) x 45.7 cm (h)
Cooler
Hydraulic Connections
# 12 ORB Inlet, # 16 ORB Outlet
Control System
Air Receiver Tank (recommended, not included)
Minimum 6-Gallon Air Receiver Tank – Recommended for proper operation of all functions.
Panel Color
Warranty
OUR QUOTING PROCESS ALLOWS FOR HASSLE-FREE QUOTE SUBMISSION IN JUST A FEW MINUTES OR LESS!
WE ARE AVAILABLE MONDAY TO FRIDAY FROM 7:30AM - 4:00PM TO ANSWER ALL INBOUND INQUIRIES
TK Truck Body
16445 130 Ave NW,
Edmonton,
AB T5V 1K5
Phone: 780 447 9529
Fax: 780 447 2468
SALES: John office line 780 447 9535
PARTS: Mike E office line 780 447 9532
SERVICE: Tyler Trosko office line 587 416 2552
